Claveler Posted September 17, 2005 Report Posted September 17, 2005 (edited) OK. I bought a Gibson 498t humbucker for my guitar. It has four cables. Red, Green, White, Black and Shield. The instructions say to connect Red to controls; Solder green and white, tape them and leave them alone; and to connect Black and Shield to ground. I assume that I have to connect the red one to the toggle switch. The Green and White cables are easy. Now, where the hell do I connect Black and Shield? This is just for curiosity, as I sent my guitar to a store so that they install the oick up. Edited September 17, 2005 by Claveler Quote
blackburncustomguitars Posted September 17, 2005 Report Posted September 17, 2005 Hi, Assuming that you have all the rest of the wiring of the pickups correct, solder the gounds to the back of the pot where you have the highest number of other grounds (called star grounding). Peace, DaveOK. I bought a Gibson 498t humbucker for my guitar. It has four cables. Red, Green, White, Black and Shield. The instructions say to connect Red to controls; Solder green and white, tape them and leave them alone; and to connect Black and Shield to ground. I assume that I have to connect the red one to the toggle switch. The Green and White cables are easy. Now, where the hell do I connect Black and Shield? This is just for curiosity, as I sent my guitar to a store so that they install the oick up. ← Quote
Claveler Posted September 17, 2005 Author Report Posted September 17, 2005 Can they be connected to the side of the switch as well? Quote
westhemann Posted September 17, 2005 Report Posted September 17, 2005 bad start claveler...watch the language or your stay will be very brief Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.