daveq Posted August 18, 2003 Report Posted August 18, 2003 I got my maple top today and it looks very good. The sides that are supposed to be bookmatched are not very straight / flat. I have access to a jointer but I wanted to see if anyone has run into this before. If I take off a little from one side (using the jointer), I need to take the same amount from the other side to keep things looking good, right? Anything else I should watch out for or beware of? Quote
Jehle Posted August 18, 2003 Report Posted August 18, 2003 When I've done this sort of thing before, I've clamped the two pieces together and smoothed them both at the same time. I didn't use a jointer. A plane or scraper, or even a sander could be used to neaten the edge. Quote
Scott Rosenberger Posted August 18, 2003 Report Posted August 18, 2003 Just count how many passes you make with the first piece on the Jointer, then repeat with the second piece Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.