Orkestra Posted October 19, 2006 Report Share Posted October 19, 2006 I recived this body (with broken neck... i know, I know!) from a friend, the front had most of the paint removed and had been used as a practice pad for a drummer for some time! Needless to say, its in a bit of a state, I began to try and sand it down, but decided to ask for a second opinion; just in case I ended up ****ing it up even more. Im going to spray it white; eventually. Ohh... yeah: How do I get a nice, even surface to spray onto? That was my original question I suppose Quote Link to comment Share on other sites More sharing options...
Primal Posted October 19, 2006 Report Share Posted October 19, 2006 Please read the picture posting rules. I would think that a combination of sanding and wood filling (bondo if there are some REALLY nasty gouges) should do the trick. Hopefully someone can chime in on the subject. Also, this should have been posted in the Finishing section. Quote Link to comment Share on other sites More sharing options...
sexybeast Posted October 19, 2006 Report Share Posted October 19, 2006 What he said. Quote Link to comment Share on other sites More sharing options...
marksound Posted October 19, 2006 Report Share Posted October 19, 2006 Filler, primer, lots of block sanding. Quote Link to comment Share on other sites More sharing options...
egdeltar Posted October 19, 2006 Report Share Posted October 19, 2006 What they said. Quote Link to comment Share on other sites More sharing options...
Desopolis Posted October 19, 2006 Report Share Posted October 19, 2006 WOD Quote Link to comment Share on other sites More sharing options...
prs man Posted October 19, 2006 Report Share Posted October 19, 2006 try epoxy putty for filling in the low spots. this will not shrink and is vary hard but at the same time you can sand it. I think wood craft sells the stuff. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.