Magnus Posted January 11, 2007 Report Share Posted January 11, 2007 What's a good grain filler for Black Limba? I want to spray it with a slight amber tint or clear. Quote Link to comment Share on other sites More sharing options...
Drak Posted January 12, 2007 Report Share Posted January 12, 2007 There's nothing special about Limba, any pore filler typically used to fill pores will do just fine. You have the usual suspects...water-based and oil-based from Behlens, CA glue, 2-part epoxy (which you can dye any color you want), glass bead filler from LMI, etc.... Quote Link to comment Share on other sites More sharing options...
Magnus Posted January 12, 2007 Author Report Share Posted January 12, 2007 Yeah, but I want the filler to show up as little as possible. Would a lighter filler show up in the dark streaks that much? Quote Link to comment Share on other sites More sharing options...
Setch Posted January 12, 2007 Report Share Posted January 12, 2007 You want a clear filler. CA or epoxy would do the job well. Quote Link to comment Share on other sites More sharing options...
johnsilver Posted January 12, 2007 Report Share Posted January 12, 2007 As Drak says, LMI sells a clear pore filler if you don't want to use CA or epoxy. Quote Link to comment Share on other sites More sharing options...
Magnus Posted January 16, 2007 Author Report Share Posted January 16, 2007 Thanks, guys. Yeah, I don't want to use CA or epoxy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.