BJC132003 Posted January 17, 2007 Report Share Posted January 17, 2007 After reading Bill Jehle's great tutorial on creating logos on PG...I have a question involving it. I had a guitar that if all goes right, I will be staining the top of the headstock and the body cherry red. (if anybody has any random advice on doing that alone, don't hesistate to slam me with it!) So, I plan on creating a custom logo, but with the stain, at which point in the process of finishing the headstock should I apply the decal? Help appreciated greatly! Quote Link to comment Share on other sites More sharing options...
ryema22 Posted January 17, 2007 Report Share Posted January 17, 2007 (edited) After staining... Then clear coat, sanding between coats until the logo is level and the lines dissapear in the lacquer As a side note, find the thinnest transparent printing stock you can get your hands on. I just finished a logo this week and it took an unbearable amount of time to get the raised lines of the logo to dissapear. Edited January 17, 2007 by ryema22 Quote Link to comment Share on other sites More sharing options...
pmarlin Posted January 17, 2007 Report Share Posted January 17, 2007 I bought a waterslide decal kit (for model cars)from Hobby Lobby and they work great it even comes with software that you can use to create your design. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.