IbanezFreak666 Posted May 17, 2007 Report Posted May 17, 2007 im thinking of painting an old superstrat body pink and black, fluro pink on the top half and black on the bottom and a swirl of the 2 in the middle. can anyone give me some advice on how to do this, what paint to use etc im a complete noob when it comes to painting but i want to start off with a challinge, if i just did a plain colour i would be sanding it down again by the summer to repaint it. Quote
zeppelinchld Posted May 18, 2007 Report Posted May 18, 2007 wut are you painting it w/???? spray paint or something else. i can probably help if its just rattlecan. Quote
IbanezFreak666 Posted May 18, 2007 Author Report Posted May 18, 2007 it will probably be rattle cans, however i am looking for advice on what paint to use. i dont really mind what medium i use its the final effect thats important to me. Quote
ledhead420 Posted May 18, 2007 Report Posted May 18, 2007 you probably wont be able to swirl the paints just in the middle. I would go for a swirl of black and pink throughout the body. Quote
aidlook Posted May 18, 2007 Report Posted May 18, 2007 Just swirl the whole guitar, then mask of the middle and paint the back and front Quote
IbanezFreak666 Posted May 18, 2007 Author Report Posted May 18, 2007 oo thats a great idea. if i can get it to work. i thought about masking off one side and that half the the swirl and painting it, then painting the other side and letting it bleed it wont be a complex swirl but it could work :/ Quote
crazier Posted May 25, 2007 Report Posted May 25, 2007 im thinking of painting an old superstrat body pink and black, fluro pink on the top half and black on the bottom and a swirl of the 2 in the middle. can anyone give me some advice on how to do this, what paint to use etc im a complete noob when it comes to painting but i want to start off with a challinge, if i just did a plain colour i would be sanding it down again by the summer to repaint it. I stripped mine down then sanded it was stuck with a paint designe then i hit on the idea to get some cheap felt tip pens various colours and take them to pieces using the inside ink spungy thing and rub on the front of my guitar starting with light coulors yellow then orange then red then smuging black into it then light brown then back to the yellow did the same on the back left the edge bare wood took ages to dry 24 hours still a bit wet so thought sod and still sprayed it with clear acrylic lacouer its turned out unreal and it looks ace sorry no pics as my camera is on hols with the wife. The pens cost me 99p from my local new agents or you can get them from vertualy any shop thease days. Quote
IbanezFreak666 Posted May 26, 2007 Author Report Posted May 26, 2007 nah i want a really vibrent colour, and im then going to put a very thick build up of clear over it so it looks like its set in glass Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.