thewongster Posted March 10, 2008 Report Share Posted March 10, 2008 Hello there long time no post! Ok, so what would be the best way to cut out a pickguard? Im trying to replicate the pickguard to ressemble a marcus miller precision bass pickguard, however the horn will be slightly modified. Thank you, and what would be the best way to grainfill the wood? where would I find such a product? Quote Link to comment Share on other sites More sharing options...
Jon Posted March 10, 2008 Report Share Posted March 10, 2008 Scrollsaw, bandsaw, or coping saw, whichever you have available. For grain filling I use epoxy. CA glue also works well. Quote Link to comment Share on other sites More sharing options...
aidlook Posted March 10, 2008 Report Share Posted March 10, 2008 I make a template first and use a template-following bit to rout the pickguard out, then use the same template to bevel the pickguard with a 45 degree router bit. After that I just scrape any uneven parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.