avengers63 Posted June 25, 2009 Author Report Share Posted June 25, 2009 (edited) That's because it isn't. I followed the schematic from the Seymour Duncan site for 3 singles, 5-way, 1 vol, 1 tone, as found in this link. Here's what I have on the 5 way switch: 1: jumper to D 2: bridge hot 3: middle hot 4: neck hot A: B: C: D: jumper to 1, out to volume pot The schematic had nothing for a ground from the switch. Edited June 25, 2009 by avengers63 Quote Link to comment Share on other sites More sharing options...
wood is good Posted June 25, 2009 Report Share Posted June 25, 2009 What about from the jack? Where did you ground the ground from the jack? Quote Link to comment Share on other sites More sharing options...
avengers63 Posted June 25, 2009 Author Report Share Posted June 25, 2009 found it I had the ground & hot on the jack backwards. Tonight I set the action, adjust the truss rod, and do the intonation. Quote Link to comment Share on other sites More sharing options...
G.I. Ace Posted June 25, 2009 Report Share Posted June 25, 2009 Great build, an absolute beaut Quote Link to comment Share on other sites More sharing options...
chops1983 Posted June 25, 2009 Report Share Posted June 25, 2009 Nice work John. The build came out great! Looking forward to some shiny daylight shots The wiring was just like the neck, you didn't want to do any work on necks for ages until this build and you pulled that off and its the same with the wiring, Just be methodical about it and then its (as we say in oz) a piece of piss. GOTM? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.