gibsonboy Posted March 18, 2012 Report Share Posted March 18, 2012 This is what im trying to do,,,,,,, i have a hss setup, standard strat singles in neck and mid with an irongear 4 wire hb in the bridge, i want to coil split the hb so when the 5 way switch is in the bridge position i can switch between noth coil/hb/south coil using a 3 way toggle switch, there are no tone pots just one master volume pot. Anybody have or know of a wiring diagram for this set up. Thanking you all in advance for any help given. Quote Link to comment Share on other sites More sharing options...
Tim37 Posted March 19, 2012 Report Share Posted March 19, 2012 i would skip the N. coil/S. coil there wont be enough tone shift for the hassel of it all. i would also just drop a push pull pot in the volume spot to control the split. Quote Link to comment Share on other sites More sharing options...
bob123 Posted March 19, 2012 Report Share Posted March 19, 2012 i would skip the N. coil/S. coil there wont be enough tone shift for the hassel of it all. i would also just drop a push pull pot in the volume spot to control the split. +1 If you're gonna go switches, you can do toggle switches to control each pup, and do a 3 way for the HB. It allows you full control over any pup switching you'd want to do, and looks really clean. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.