arman Posted August 14, 2019 Report Share Posted August 14, 2019 Hi, I've got my ltd EC1000p several months ago and everything was working fine. but the other day when I plugged my guitar in JACK 1 with mono cable the magnetic pickup didn't work. when I use the mag/piezo selector only piezo pickup have sound. It means I don't have the blend of both magnetic and piezo or magnetic pickup right now. please help me with this. what could be the problem? it is good to know that when I use JACK 2 the magnetic pickups work fine and when I use a stereo cable in JACK 1, just piezo pick up have sound and nothing is coming out of magnetic pickups. I appreciate any help on this. Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted August 14, 2019 Report Share Posted August 14, 2019 Can you push the plug any deeper into Jack 1 while trying to get a sound? Since the tip of the plug is for the magnetic pickup when using a stereo cable it sounds like the tip isn't touching the furthermost connector inside the jack. Either the connector has bent/broken or the wire for it is loose. Open the control cavity and look for any loose wire ends. Quote Link to comment Share on other sites More sharing options...
mistermikev Posted August 21, 2019 Report Share Posted August 21, 2019 open it up and inspect. more than likely the mono jack has been disconnected or perhaps is making contact with the shield. ask youself: what changed? new cable? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.