nakedzen Posted April 19, 2023 Report Share Posted April 19, 2023 Testing all the components here. Still waiting for the Hammond case I ordered for these. I guess I could just use that cardboard box as housing meanwhile. Motor seems to hold fine for my needs, 1000 rpm at full throttle even with that wood block and magnet on there. 12V power so it's even safe to use! Quote Link to comment Share on other sites More sharing options...
woodfab Posted April 21, 2023 Report Share Posted April 21, 2023 Good start, I built one a few years 1 Quote Link to comment Share on other sites More sharing options...
nakedzen Posted April 23, 2023 Author Report Share Posted April 23, 2023 Cool! What does the right side do? Here's how it's now, the enclosure I want is on backorder so two-three week wait before I can finish this. I'll need to figure out a way to get a counter that can go backwards automatically. Quote Link to comment Share on other sites More sharing options...
woodfab Posted April 24, 2023 Report Share Posted April 24, 2023 The far right fixture was for manual rotating. Quote Link to comment Share on other sites More sharing options...
nakedzen Posted May 16, 2023 Author Report Share Posted May 16, 2023 Here's the (almost) finished article. Had to hide my shoddy dremel work with the big labeled sticker. Only needs the screws to connect the guide arm. Box is "sligthly" oversized. 1 Quote Link to comment Share on other sites More sharing options...
nakedzen Posted May 16, 2023 Author Report Share Posted May 16, 2023 Inside: Quote Link to comment Share on other sites More sharing options...
Bizman62 Posted May 16, 2023 Report Share Posted May 16, 2023 That box won't cause cooling issues by being too tight! 1 Quote Link to comment Share on other sites More sharing options...
nakedzen Posted May 17, 2023 Author Report Share Posted May 17, 2023 I took the biggest enclosure since I was worried if the components would fit, the webstore didn't have dimensions for the slanted portion. Overshot it "a little". Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.