ibreakemineedtobuildem Posted July 10, 2004 Report Posted July 10, 2004 I just got in a bridge from ebay.It was a hardtail strat style.I have a couple,but they are all string through body.This loads through the back. Would this bridge lack tone or a little thin in comparison to the string through? Just wonderin Quote
Primal Posted July 10, 2004 Report Posted July 10, 2004 They work fine on basses. I'm not sure on guitars, however. Guitarist, speak up! Quote
dcamp67 Posted July 10, 2004 Report Posted July 10, 2004 Tele's have worked fine that way for 50+ years. Go with a "thicker" set of pup's if you are worried about depth to your tone. EMG's if you don't mind actives, Seymore Duncans or DiMarzios if you only want to use passives. Quote
soapbarstrat Posted July 10, 2004 Report Posted July 10, 2004 Can't you just drill 6 holes in the base plate so it can be used either way ? Here's my latest idea (for making a full-sized strat into a "travel guitar"). Holes in the baseplate and through the body are big enough for the strings to go through from the top of the guitar and out the back, then you run a metal rod through the ball-ends of the strings to anchor them against the back of the guitar. Then, you can always lossen the strings, pull the metal rod out and get the strings off the body. Either that or little washers with a notch cut through , so they slip onto the ball ends. Quote
ThePlague Posted July 10, 2004 Report Posted July 10, 2004 i have a top loading hardtail on one of my guitars. they're fine. the strings going through the body doesn't make a big difference. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.