YES! It's finally assembled! This project was the toughest ever and the most time consuming. I'm glad I pushed myself because the end product looks and sounds fantastic.
Things I could've changed in retrospect:
1. Bigger lower horn cutaway.
I have problems reaching the 24th frets on the bass side because the lower horn gets in the way. Clearly a design flaw, but I probably won't even reach those frets!
2. Left the control cover as it was without laminating an aluminium sheet.
It was a pain trying to get the veneer to stick evenly onto the aluminium because it kept breaking and I had areas where the glue didn't contact the veneer. The aluminium also made it much heavier and I couldn't get the magnets to get a firm grip enough so I had to use some screws in the end. The cover held in place with the magnets but a gentle knock against the edge would make it fall off.
3. Straight string feed from the nut to the tuners
The A and D strings were at an angle going to the tuners, which isn't ideal. I designed it this way purely to get the tuners to line up nicely with the headstock edge and I neglected the string pull. I don't think it's a big deal on a bass without a tremolo unlike guitars, but I guess it's purely aesthetics.
Anyway enough reflecting. Time for some pics!