jammy Posted December 27, 2004 Report Share Posted December 27, 2004 My brother is considering purchasing another head to go along with the one he allready has. He was planning to A/B/Y the amps so he can run both at once (like Stevie did) At the moment he only has a 1x12 and doesn't really want to upgrade. Is it possible to run both heads into the single speaker? If so, how would the impedances work out? Quote Link to comment Share on other sites More sharing options...
syxxstring Posted December 27, 2004 Report Share Posted December 27, 2004 There is an amp switcher made for George Lynch that would do the trick. Probably more expensive than another cab thou... Quote Link to comment Share on other sites More sharing options...
bassman Posted December 27, 2004 Report Share Posted December 27, 2004 Be careful! If you run both heads into the cab at the same time you may ruin both of your heads, I did something similar, by accident of course, I ended up ruining an SWR 4404 bass head and a powered mixer at once. Quote Link to comment Share on other sites More sharing options...
lovekraft Posted December 27, 2004 Report Share Posted December 27, 2004 Email Weber VST and ask about their Fourhead® switcher, or if you're in a DIY state of mind, take a look at Randall Aiken's HeadSwitch (take note that Mr. Aiken assumes no liability or responsibility for support in connection with this design, so if you blow anything up, you're on your own). Quote Link to comment Share on other sites More sharing options...
Daniel Sorbera Posted December 27, 2004 Report Share Posted December 27, 2004 here ya go head switcher. Of course it would just be cheaper to just buy a really good speaker and build a cabinit yourself... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.