Alchool Posted June 17, 2003 Report Share Posted June 17, 2003 Can I make a neck with 2 laminates of maple? What are the differences between two-ply laminated neck and three-ply? Quote Link to comment Share on other sites More sharing options...
Brian Posted June 17, 2003 Report Share Posted June 17, 2003 Yes you can and the difference is the number of pieces, if you look at the picture below you will see a 3-ply neck all made in Maple Quote Link to comment Share on other sites More sharing options...
westhemann Posted June 17, 2003 Report Share Posted June 17, 2003 the more laminates you have, the stiffer and more resistant to twisting it is.some say it's a little less resonant though.i prefer a laminate neck.the stiffness more than makes up for anything else IMO Quote Link to comment Share on other sites More sharing options...
Alchool Posted June 17, 2003 Author Report Share Posted June 17, 2003 Yes you can and the difference is the number of pieces, if you look at the picture below you will see a 3-ply neck all made in Maple I knew that the main difference's the number of pieces... I guess that this time westhemann reply was more explanatory But as always, thank you! Quote Link to comment Share on other sites More sharing options...
the third eye Posted June 17, 2003 Report Share Posted June 17, 2003 but you gotta admit that's a cool pic Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.