Unrealize Posted May 7, 2008 Report Share Posted May 7, 2008 What do you think about this guys? I can get this for about 190€/300$. Could be a good addition to my little shop, or is it a waste of money? thanks for any input... Type C 16AE Drilling capacity 2-16mm Max. spindle stroke 85mm Drill chuck 16mm keyless Work table dimension ø310mm Distance spindle/table 420mm Throat depth 194mm Swing 360 degrees Tilt +-45 degrees Motor 1HP Voltage 1x230V-50Hz Number of speeds 12 Rpm 210-2580 Total height 1003mm Weight 66kgs Quote Link to comment Share on other sites More sharing options...
jmrentis Posted May 7, 2008 Report Share Posted May 7, 2008 The only thing that would concern me would be the throat depth. I had a smaller benchtop from a while back and it worked for most general purposes, but when I went to drill the post holes for my TOM bridge, it wouldn't reach and it was a standard shape guitar. Certain body shapes are way worse than others for this. I think the throat on my old one was close to yours. I went out and bought a new benchtop because I didn't have room for a standing press, I got a 12" Delta that works well for my needs and will reach any bridge post I need. I got it pretty cheap also, look around more see what you can find before committing to that one. If you can fit a standing drill press, definitely save and go for that. Best of luck. J Quote Link to comment Share on other sites More sharing options...
Mattia Posted May 8, 2008 Report Share Posted May 8, 2008 Looks like a good machine. Plug it in, check it runs smoothly (no vibration), check the quill for runout (chuck a long, thin bit in there, see if it runs true or vibrates/moves a lot) and wobble when plunged. Eyeballing it, I'm guessing that has something like 6" throat depth, which should be enough for pretty much all guitar work. Quote Link to comment Share on other sites More sharing options...
Unrealize Posted May 8, 2008 Author Report Share Posted May 8, 2008 Thanks guys. Mattia, from my quick conversion it should be 7,5" throat depth. If it is in working order, then it is cheap and should probably be a good buy I think... Quote Link to comment Share on other sites More sharing options...
orgmorg Posted May 8, 2008 Report Share Posted May 8, 2008 But is that actually the throat depth, or the swing. Drill press sizes are typically listed in terms of their "swing" which is twice the throat depth. I ask partly because it looks like a benchtop model, and you don't often see those with that much throat depth. Also, I don't know how machinery prices are over there, but I just bought a brand new 15" floor standing drill press for $300, so that doesn't sound like such a great deal to me. Quote Link to comment Share on other sites More sharing options...
Unrealize Posted May 8, 2008 Author Report Share Posted May 8, 2008 Orgmorg, according to the manufacturers brochure it is the throat depth that is 7,5" (approx). Usually prices over here are insanlely much more expensive than anywhere else.. hehe.. I'd order one from the states if it were not for the power differences we have. But we will see, I'm not going to ruin myself getting this one, so... Thanks a lot tho.. Quote Link to comment Share on other sites More sharing options...
mdw3332 Posted May 18, 2008 Report Share Posted May 18, 2008 I bought a radial arm drill press that is really versatile. The biggest complaint I had about the smaller one I had was that I couldn't do the holes for string through ferrules. Quote Link to comment Share on other sites More sharing options...
Mattia Posted May 18, 2008 Report Share Posted May 18, 2008 But is that actually the throat depth, or the swing. Drill press sizes are typically listed in terms of their "swing" which is twice the throat depth. I ask partly because it looks like a benchtop model, and you don't often see those with that much throat depth. Also, I don't know how machinery prices are over there, but I just bought a brand new 15" floor standing drill press for $300, so that doesn't sound like such a great deal to me. Seriously, that looks like a 16" press to me, pretty much identical to the one I just got (new, 300, chinese, but runs smooth, quiet, true and stable, so no complaining). Comparitive shot with a real 'benchtop' model: I mean, they both sit on benches, but the new one can drill string trough ferrules. On the far side of the body. Across the full width of an average strat or similar. Good bit bigger than it looks in a picture with precious little frame of reference. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.