DC Ross Posted April 16, 2009 Report Posted April 16, 2009 This just came in (as you see it - no case, pickguard off, about an inch of dust on everything): There's a Sustainiac as well as a Fishman / LR Baggs piezo system, 6 mini switches, a push-pull and two batteries. I'm really hoping everything works as it should -- I really don't want to start digging around in that I think the cavity for the pc board was routed with a spoon. Wish me luck! Quote
avengers63 Posted April 16, 2009 Report Posted April 16, 2009 wow Plug it in before you get in there, just to see what works and what doesn't. If you can cram it all back into the control cavity, that is. Quote
StormLeader Posted April 16, 2009 Report Posted April 16, 2009 Where'd you get Pete's guitar? Hahahahahah. That looks insanely complicated. -Stormy Quote
Dean Posted April 17, 2009 Report Posted April 17, 2009 Sure that's not a lap top with a strat pick guard shape. Quote
djhollowman Posted April 17, 2009 Report Posted April 17, 2009 Where'd you get pete's guitar? :D What's it in for anyway, just out of idle curiousity...... DJ Quote
Paul Marossy Posted April 17, 2009 Report Posted April 17, 2009 Whoever did that could have been a little more conscientous about the wiring. There's way too much extra wire in there from what I can see... Quote
erikbojerik Posted April 17, 2009 Report Posted April 17, 2009 You'd better get your hands on the original wiring diagram....the guy could have brought it in for you to buff out some scratches, knowing all along that his electronics don't work. Then he gets the axe back and says "HEY! You screwed up my electronics!!!" Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.