Linny Posted June 17, 2012 Report Share Posted June 17, 2012 This is based on the single cut guitar i built about a year ago. The outcome, hopefully. My master template and a copy underneath. Band sawn out, routed and sanded to shape, roughly 5 hours work in making the templates and getting it to this point. Nice 2 piece blank. Still rough carving at this point, this was carved out out with an angle grinder and a ROS. I added an angle to the whole body, this makes the body about 6mm thinner at the neck end. Quote Link to comment Share on other sites More sharing options...
Linny Posted April 14, 2013 Author Report Share Posted April 14, 2013 Quote Link to comment Share on other sites More sharing options...
Linny Posted April 14, 2013 Author Report Share Posted April 14, 2013 Thats enough for just now!! Quote Link to comment Share on other sites More sharing options...
Linny Posted April 14, 2013 Author Report Share Posted April 14, 2013 Quote Link to comment Share on other sites More sharing options...
Linny Posted April 14, 2013 Author Report Share Posted April 14, 2013 Its been a while since i last posted anything! Quote Link to comment Share on other sites More sharing options...
Linny Posted April 14, 2013 Author Report Share Posted April 14, 2013 Carved out the neck, about 90% done, started to test some finish on scrap! Quote Link to comment Share on other sites More sharing options...
verhoevenc Posted April 14, 2013 Report Share Posted April 14, 2013 Killer clean! Chris Quote Link to comment Share on other sites More sharing options...
ScottR Posted April 15, 2013 Report Share Posted April 15, 2013 You been savin' up! Like Chris said, very clean classy work. And zircote rocks! SR Quote Link to comment Share on other sites More sharing options...
eddiewarlock Posted April 15, 2013 Report Share Posted April 15, 2013 Beautiful! Quote Link to comment Share on other sites More sharing options...
Linny Posted April 15, 2013 Author Report Share Posted April 15, 2013 Thank guys, i aim to be clean! Quote Link to comment Share on other sites More sharing options...
verhoevenc Posted April 15, 2013 Report Share Posted April 15, 2013 Remember. FULL pics of the arcade switch wiring hahaha. Chris Quote Link to comment Share on other sites More sharing options...
Linny Posted April 17, 2013 Author Report Share Posted April 17, 2013 Remember. FULL pics of the arcade switch wiring hahaha. Chris Not sure i will do an arcade switch on this on! All i do is wire it across the jack in parallel as a kill switch! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.