help with 2 humbuckers wire up

[pup]

The deal is this, 2x humbuckers 2x tone pots, 2x Vol pots, 2x caps, 1x3 way toggle and a output jack, standard wiring  followed the diagram that came with the upgrade 335  kit from Realparts.

It works great until I turn down the Bridge vol and that will wind down both pickup volumes together and render the neck vol useless?

Would be much obliged for any pointers you guys could throw my way.

Regards

pup....

 

 

[Prostheta]

Can you post the diagram you worked off? Proofing that would be a good start in figuring whether it is a problem of the original design or how you've wired it. It's a pretty common issue though.

[curtisa]

Realparts says the 335 wiring kit is from Allparts.

Allparts provide the wiring guide here

The fix is to swap the left and centre lug terminations on the volume pots when viewed from the back - the pickup centre conductor goes to the centre lug of the volume pot and the centre conductor to the switch goes to the left lug.

[Prostheta]

[pup]

Thank you so much curtisa That was it, all in and working now, you sir are a prince among men.