sscovill Posted July 7, 2004 Report Share Posted July 7, 2004 Can anyone help me find a spec sheet, to-scale CAD drawing for a Gibson Les Paul body? I'd like to try to make my own from scratch but can't find any specs that I can use on a CNC machine. Any help is greatly appreciated. Thanks, Steve sscovill@msn.com Link to comment Share on other sites More sharing options...
Hotrock Posted July 7, 2004 Report Share Posted July 7, 2004 You can find a CAD drawing over at the mimf forum. Probably not suiatble for a CNC at the minute but shouldn't take too much work. Link to comment Share on other sites More sharing options...
krizalid Posted July 7, 2004 Report Share Posted July 7, 2004 if i'm not mistaken the plans are for LP junior? Link to comment Share on other sites More sharing options...
Hotrock Posted July 7, 2004 Report Share Posted July 7, 2004 Oh I know there are Jr plans over there (I'm using them myself) but I thought that there was a standard LP too. Sorry if I sent you on a wild goose chase. I'll put my dunces hat on Link to comment Share on other sites More sharing options...
Kevan Posted September 19, 2004 Report Share Posted September 19, 2004 Please post in alternate thread here: http://projectguitar.ibforums.com/index.ph...wtopic=9225&hl= THREAD CLOSED. Link to comment Share on other sites More sharing options...
Recommended Posts