I just strung up my first build before finishing it to test it out and maybe figure out the electronics. I thought I may have had it figured out, but no sound came out when I plugged in. I've since fiddled with it a few times but still no luck. Here's where I'm at now:
The 500k pot is the volume, 250k is tone, the blend pot is blending between pickups and the 1M pot is what I'm trying with coil tapping.
Basically with the 1M pot, I'm trying to control how much sound comes from one of the two coils in the humbucker. I was thinking that with it all the way down, I would have a coil tapped-ish sound, and with it all the way up I would have the full sound of the humbucker.
The green wire coming from the humbucker is supposed to be the regular humbucker output. The gray and red wires are the end of the first coil and start of the second. I may have the colour code mixed up but I have tried switching the two back and forth with no luck.
And the orange wire from the single is the hot wire I believe, again I have tried switching the wires with no luck.
Anyway I have what's on the diagram soldered up right now but it doesnt work.
Any help is appreciated, thanks!