Jeremy, you are getting to be like Darren. He swirls anything that isn't nailed down and now you are inlaying everything. But, yet again, you amaze me with your talent. That is why I wouldn't go anywhere else to get layed....I mean get an inlay
Is it 1-3/4 thick?!?!
All I know is that plexi gets hot and can melt and fuse back together after the cut. WD-40 works very well to help keeping the plexi from doing that
I've seen both processes done....removing the frets and leaving the frets on.
Save yourself the agony, do as Brian and Jeremy recommend, remove the frets
This is probably familiar to some of you:
JS1000BTB
JS1BK (with middle single pup)
JEM7PBK (Custom swirled)
JEM7DBK
JEM7VSBL (It was a gift!)
PGM100JB
PGM300WH
PGM500CA
PGM10TH
PGM7 (Custom by EKG)
RG3120TW(now an RG3120NT (Natural))
RG7620
RG570
RGR580JBB
EB/MM EVH (Custom by EKG)
Carvin Legacy Half Stack
MY GEAR:
Are the mounting tabs on the EMG's rectangular? Plastic or Metal?
I've altered mounting tabs on other pups by clipping off the outside corners of the tabs to enable them to fit in an Ibanez direct mount pocket. Works fine.
As for direct mounting them. Are they not tall enough? Maybe adding a wood "spacer" between the pup and body would work? Nothing permanent.
PGM's are great! I have 4!!
They are the RG shape. Volume is way back, out of the way. The 5 way selector is in a different position as well. The output jack is straight out as opposed to the angled jack Bear mentioned above. Not in the same place as a standard RG, but still no angle.
I'm working on supplying PGM's to the masses