LGM Guitars Posted June 20, 2003 Report Share Posted June 20, 2003 I have a few sets of some nicely figured maple veneer, pieces are 20" x 7" (big enough for most any electric guitar body). The little spots you see on it are some mud splatters but it sands out fine. Here are the 3 different grain patterns I have, and the quantities of each 4 Sets 3 Sets 4 Sets Price is $40 for a bookmatched set + shipping. Please email me if interested LGM@lgm-guitars.com Quote Link to comment Share on other sites More sharing options...
Brian Posted June 20, 2003 Report Share Posted June 20, 2003 Anyone of these the pattern from the deep quilted body and headstock on the finishing post? Quote Link to comment Share on other sites More sharing options...
LGM Guitars Posted June 29, 2003 Author Report Share Posted June 29, 2003 ok, opening up to offers, just don't be silly about it please Quote Link to comment Share on other sites More sharing options...
imikeyi Posted July 1, 2003 Report Share Posted July 1, 2003 rather than start a new thread, i'll just say 'wow' i had no idea you built Francesco Fareri's 7 string guitar! (thats what it says on his website) Quote Link to comment Share on other sites More sharing options...
LGM Guitars Posted July 3, 2003 Author Report Share Posted July 3, 2003 Yup, I did so, here's the original thread about Fra's guitar Francesco's 7 string There are also quite a few pics on the LGM website Quote Link to comment Share on other sites More sharing options...
krazyderek Posted July 24, 2003 Report Share Posted July 24, 2003 got any of the second ones left? (u had 3 originaly) Quote Link to comment Share on other sites More sharing options...
LGM Guitars Posted July 24, 2003 Author Report Share Posted July 24, 2003 got any of the second ones left? (u had 3 originaly) Yup I do I think I have one set of that one left, if you want more than one I'll just double check to make sure Quote Link to comment Share on other sites More sharing options...
krazyderek Posted July 24, 2003 Report Share Posted July 24, 2003 hmmm, well i'm thinking about getting some to try out brian's tutorial on it, but the guitar in question is going to be a neck thru, so won't the veneer cause some height problems where the finger board will later be glued on... or should i have the finger board on there first then cut out a groove in either peice to accomadate the fb.? Quote Link to comment Share on other sites More sharing options...
LGM Guitars Posted July 26, 2003 Author Report Share Posted July 26, 2003 the thickness is only .040" for teh veneer, but you will probably want to cut it to fit around the fretboard. Quote Link to comment Share on other sites More sharing options...
krazyderek Posted July 31, 2003 Report Share Posted July 31, 2003 k, sorry for the delay, i was checking my local supplier for what they had, are u in the states? or canada? depending on shiping and weather or not i have to pay duties if it crosses the border, then i'm thinkin somewhere in the 25-30$ range Quote Link to comment Share on other sites More sharing options...
Bingo328 Posted August 14, 2003 Report Share Posted August 14, 2003 I would be interested in either the second or third set. Whats your guess on shipping to PA. Thanks Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.