Roli Posted September 5, 2003 Report Share Posted September 5, 2003 I need the wiring for 3 pickups with 3 individual on-off switches and 1 volume + 1 tone pots. I've seen that configuration on early Schecter strats, and would be nice to make that mod on my axe. Quote Link to comment Share on other sites More sharing options...
Brian Posted September 5, 2003 Report Share Posted September 5, 2003 Wouldn't that be something like this one, except you add an on/off switch inline either on the white wire or the ground and just keep adding pickups doing the same thing? Quote Link to comment Share on other sites More sharing options...
Saber Posted September 5, 2003 Report Share Posted September 5, 2003 I think I found it here. Just ignore the battery wiring. Quote Link to comment Share on other sites More sharing options...
Roli Posted September 5, 2003 Author Report Share Posted September 5, 2003 Whoa! Thank you Saber and Brian! Quote Link to comment Share on other sites More sharing options...
westhemann Posted September 5, 2003 Report Share Posted September 5, 2003 if you use the emg diagram don't forget to add the ground to the bridge.passive pickups need that while active ones don't Quote Link to comment Share on other sites More sharing options...
canuckguitarist Posted September 6, 2003 Report Share Posted September 6, 2003 I think Jehle is doing something similar to that on the third "Jellycaster". Only with an HSH pickup configuration....not sure but I may be wrong. Aaron Quote Link to comment Share on other sites More sharing options...
Jehle Posted September 8, 2003 Report Share Posted September 8, 2003 I think Jehle is doing something similar to that on the third "Jellycaster". Only with an HSH pickup configuration....not sure but I may be wrong. Aaron Yep. Jellycaster number 3 is going to have 3 separate on-off switches. But it's actually more complicated than that. Humbuckers will have 3 settings: tap , off , series Single coil will have 3 settings : in phase , off , out-of-phase All that will dump into the Volume and master tone. I hadn't thought about it, but I should probably draw up the schematic and post it. Anyone interested in that sort of thing? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.