USMCHueston0311 Posted March 27, 2010 Report Share Posted March 27, 2010 I got finished scraping the binding and leveling it to the guitar, but there is tool marks, and some knicks in the binding from where the scraper chattererd, how can i smooth these out? Maybe some acetone on a cotton bal? Quote Link to comment Share on other sites More sharing options...
pariah223 Posted March 27, 2010 Report Share Posted March 27, 2010 I have only worked with plastic binding once, and did not have this problem.. But could it be as simple as going a little easier with the scraper to smooth it out? I personally wouldnt be comfortable using solvents and stuff on the attached binding.. Quote Link to comment Share on other sites More sharing options...
Samba Pa Ti Posted March 27, 2010 Report Share Posted March 27, 2010 if its plastic binding id use wet and dry paper, depends on the plastic though what it will turn out like. Quote Link to comment Share on other sites More sharing options...
MP63 Posted April 4, 2010 Report Share Posted April 4, 2010 Go lightly and change the angle. Quote Link to comment Share on other sites More sharing options...
Fliski Guitars Posted April 9, 2010 Report Share Posted April 9, 2010 Id just carefully go round it with a brand new razor blade... Sanding will make it go fluffy and will probably need scraping again afterwards anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.