Right - pictures....
The finished fretboard, inlayed, fretted - ready for glueing onto the neck. With a mandolin, you can fret before attachment of the board, unlike on a guitar.
Fretboard
Too many clamps are better than too few I used a the imbedded nails technique to stop it sliding about all over the place while I was clamping up.
Clamped
The headstock was then thicknessed on a disc sander, and a bobbin sander used for a bit of rough carving of the volute...
Rough neck
An hour with the spokeshave, files and some sandpaper left me with this...
Finished neck 1
Finished neck 2
I've also wacked the tuners on since the pics were taken. A little bit of final work is still required, and I've got to make the bridge, but I'm about done
I also got the neck blank for my guitar...It's a master grade bit of flame maple, almost perfectly quarter sawn (better at one end than the other)
And that's only after sanding - can't wait to see it planed/scraped!