croaticum

Thank you unclej ill go check it out and ill tell you what happened. It is einhells 24l aircompressor Ill post a pic of it i just have to recharge my batteries for a cam

My air compressor just decided he wont work with me anymore. It is a 8 atmosfere presure and it pumps only at little under 2. If anyone would know the reason for that please post your opinion. Any help will be greatly apriciated Thanks

it depends what kind of stick do you get in your car. I drive street races here and there and i allways use stick! You have full controll over your speed that way. Offcourse if you have racing stick that is much better. And driving with stick is as easy as automatic just clutch, shift and accelerate! lol plus side is that you have faster responce between gears and there is no 2 sec waiting perion between baking up and first gear. And considering economical driving you can be more economical since you can drive about 30 miles in your 5 gear on just over 1000 rpm's.

If we are talking really cheep then this thing is i guess thr low cost as you can go I refinished loads of guitars with that and never had any problems with it. The only down side is that it is fairly hard to clean once you done spraying. This guitar is one of guitars that i finished with that little gadget and as you see it turned ok. Good thing to practice with too.

I have 50 L compressor and the thing is that best way to spray nitro color is arround 7-8 bar and same clearcote not over 2-3. At least thats what i figured out 'cos when i spray clearcoat over 2-3 bar it turns out to be creamy cos pressure is to big and it builds up air in clearcoat.

Mail me and ill send it to you!

Awesome bro..... I am a huge fan of explorers and this one is the moast cool looking blue i have ever seen on one. Great work and post some more pics as you go along with the project.

ermmmm.... Can i be the guy that has to drink all the beer for your ideas?!

Nice work.

thanks scottyd

dunno really to be honest. On rattlecan it ony said it is a color paint and when i asked guy on what bases it is he just said synthetic

Anyone ever don e some painting with synthetic paint? If yes what was its behaviour, pro and cons? ah yes and how it reacts with nitro paint?

NOW THATS SICK

Nice work and a post in a just right time since im planing to make my first neck for myself(well not for my self, for the guitar) i got this out of yahoo microplanes im sure ill get sone this days And by the way look at this and this

try here http://members.lycos.nl/ajgp/dimensions.html

nicely done Campylobacter and welcome to forum

thanks mattia i found out that i have converter on my mobile phone lol i never thot that my phone will help me build a guitar. And let me thank you guys for the fast help you provided my with if there is anything........

only thing on my mind is that you gain yourself a pot that you needed and were ti cheap to buy one!

it is 3.175 thank you a lot you probobly saved the whole thing for me!

wouldnt Schaller Locking tuners do the trick for the lock?

awww ok so what you are saying is i will have to move lower e sadle for about 20,32mm further away from the nut. did i got it right this time?

cant i adjust it on a t-o-m once i put it on?

yes i ment where they bend over the bridge. As for bridge i think ill use t-o-m is 26.125" same as 663,6mm since i dont know the diferece between imperial and metric system. Im on metric so... thx

Ok if this lives that would be my first neck that i will ever build. I hade done some calculations and her they are: Fret Number mm from Nut mm from Fret =========== ============ ============= 1 37,3 37,3 2 72,4 35,2 3 105,6 33,2 4 136,9 31,4 5 166,5 29,6 6 194,4 28,0 7 220,7 26,4 8 245,6 24,9 9 269,1 23,5 10 291,2 22,2 11 312,1 21,0 12 331,8 19,8 13 350,5 18,7 14 368,0 17,6 15 384,6 16,6 16 400,3 15,7 17 415,1 14,8 18 429,0 14,0 19 442,2 13,2 20 454,6 12,5 21 466,3 11,8 22 477,4 11,1 23 487,9 10,5 24 497,7 9,9 25 507,0 9,4 i hope i got that part right?! Now is this correct necki done in vectors(blueprint) As you see i made it to be 25 frets just for kicks lol I have done this in corel and my question would be is the string bending pointcorrect or did i figure it all wrong. As i understood is if i had scale lets say 26 1/8 at very end of that lenght is where strings should bend??? Hope you will figure what i wanted to ask you guys?!

Maybe this will help you [url="http://www.brandsoftheworld.com/search/?query_id=730713&page=1&mtype=&brand_id=126391"]http://www.brandsoftheworld.com/search/?qu...brand_id=126391[/url]