Jump to content
Entry in the May 2024 Guitar of the Month contest is now open ×

mammoth guitars

Established Member
 View Profile  See their activity

  • Posts

    522

  • Joined

  • Last visited

 Content Type 

Everything posted by mammoth guitars

  1. mammoth guitars
    Updated.
  2. mammoth guitars
    Fill the holes with epoxy wood filler and redrill so the ferrules will cover the filled hole. Once assembled you will never know the difference.
  3. mammoth guitars
    There are two commonly used ways to transparently finish guitars, 1) stain the wood, then clear coat over it, 2) spray tinted clear over the wood, then clear coat over it. Number 1 gives the best look but 2 is easier. Either is acceptable and both are widely used.
  4. mammoth guitars
    Looks like transparent blue sprayed onto the body but could be stained. Dye is what used to stain something however problably more concentrated than a ready to stain product. Use alcohol to stain. The stewmac stuff works with either.
  5. mammoth guitars
    That is a Quilted Maple top that appears to be stained with a black burst painted edge. The stained top along with a clear coat is what makes the top jump out with the 3D effect.
  6. mammoth guitars
    +1 toothpicks and wood glue, easy clean up.
  7. mammoth guitars
    We have done that but with a double or blend pot.
  8. mammoth guitars
    When the tone pot is at 10 the maximum resistance of the pot is between the output signal and the cap to ground. The output signal does not go through the pot as a tone control is not wired in that way. When the resistance is lowered towards zero more signal is sent to the cap which shunts the high frequencies to ground.
  9. mammoth guitars
    Use a drill press with a cove molding bit with a large enough diameter to accomodate your switch/knob.
  10. mammoth guitars
    We build those to order.
  11. mammoth guitars
    Another site with pictures showing Lou the inventor in a "playing position". http://amycrehore.blogspot.com/2006/12/tee...irl-guitar.html
  12. mammoth guitars
    Our wood inventory page has been updated with new stock 10/26/2008. Please email us with any questions.
  13. mammoth guitars
    It should not affect making the neck in the same dimension with the exception of the radius.
  14. mammoth guitars
    JEM Neck DimensionsScale Length: 648mm/25.5" Width At Nut: 43mm Width At Last Fret: 56mm Thickness At 1st Fret: 19mm Thickness At 12th Fret: 21mm Radius: 430 http://www.ibanez.com/eg/guitar.aspx?m=JEM...mp;u=138#detail
  15. mammoth guitars
    You should use a spiral downcut bit versus a straight bit.
  16. mammoth guitars
    Amen to that.
  17. mammoth guitars
    Sure, just wire each volume as independent. Many basses are done this way with no pickup selector switch.
  18. mammoth guitars
    Drop in push/pull pots in place of the tone pots and retain the standard look and tone control.
  19. mammoth guitars
    Here is another http://www.atlantaguitarworks.com/
  20. mammoth guitars
    Standard LP/SG bridge pickup distance - 1 11/16 from center of bass E bridge post to center of pickup height screw. And as Primal stated neck pickup ring up against then end of the neck.
  21. mammoth guitars
    We use Loctite 410 - Black CA glue.
  22. mammoth guitars
    Just use acrylic black in the rattle can.
  23. mammoth guitars
    www.guitarfetish.com
  24. mammoth guitars
    1 Piece Mahogany Body Blanks - defect free
  25. mammoth guitars
    Do you mean G & L Guitars?
×
×
  • Create New...