Jump to content

EMG 707


DracWell
 Share

Recommended Posts

How do I change the pickups on my RG7620 to EMG 707 but still have the same switch-modes?

From what I can remember; 1st: Bridge; 2nd: Bridge Paralelled; 3rd: Bridge+Neck; 4th: Bridge Single, Neck Single; 5th: Neck.

Do I just need to set the wires from the pickups like on the stock pickups?

Link to comment
Share on other sites

  • 1 year later...

short answer from the site.

NO

it is only a two conductor [well and the obviously needed power supply] and its not setup for that. you can however add the out of phase switch to your existing switch setup without drilling..

Link to comment
Share on other sites

How do I change the pickups on my RG7620 to EMG 707 but still have the same switch-modes?

From what I can remember; 1st: Bridge; 2nd: Bridge Paralelled; 3rd: Bridge+Neck; 4th: Bridge Single, Neck Single; 5th: Neck.

Do I just need to set the wires from the pickups like on the stock pickups?

you can't really...but the 707s are quite the awesome pickups...i think they are worth the sacrifice,considering most people don't use all those options a 5 way switch has

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...