Jump to content
Entry in the May 2024 Guitar of the Month contest is now open ×

Scott Rosenberger

Blues Tribute Group
 View Profile  See their activity

  • Posts

    2,782

  • Joined

  • Last visited

 Content Type 

Everything posted by Scott Rosenberger

  1. Scott Rosenberger
    I'd take the free Mesa Boogie head and Cab... Sell it on ebay Then Buy an Egnater!!!!!
  2. Scott Rosenberger
    If I could afford one... Egnater TOL 100 Head (pre Rocktron of course)
  3. Scott Rosenberger
    Mask the hole from inside the cavity, clean any paint that might be inside the hole and mix up some epoxy and fill the holes, give it a day or so to cure completely, then CAREFULLY sand the epoxy level to the body
  4. Scott Rosenberger
    the link doesnt work, says not logged in
  5. Scott Rosenberger
    Can somebody send me the Relic Tutorial, I have a Mint 3 tone sunburst Fender 60's Reissue Mexi Strat just dying to have the **** beat out of it
  6. Scott Rosenberger
    Killer Idea, I have two trashed Strat necks laying around, now I have 2 new Towel Bars for the Basement Bathroom
  7. Scott Rosenberger
    he probably broke the nut off
  8. Scott Rosenberger
    What kind of paints did you use, (brand, Type) Also what did you use in the water? Borax, Methocellulose, Carrageean? sp?
  9. Scott Rosenberger
    I might be misunderstanding but that trem wont work on an Ibanez Radius Neck, The Schaller Radius is 12" You can shim the bridge saddles to get it right but the nut is preset to 12" and wont work
  10. Scott Rosenberger
    no problem, just get to fixin it and let us know how it works out
  11. Scott Rosenberger
    That's not a chrome strat, the body is actually hollow and made from aluminum and polished
  12. Scott Rosenberger
    the trem sucks on the 555 plus it has the ugly half vine, get a good RG 550 and put some Dimarzios in it and you'll save yourself a bunch of cash, then send it out and have the vine inaly done
  13. Scott Rosenberger
    sounds like dull knife edges, make sure the trem isn't binding in the posts, it's a common problem and it's easy to remedy, go to the tech section at www.ibanezrules.com there's a tutorial there
  14. Scott Rosenberger
    I emailed the file to brian along with a couple more to post in the downloads section
  15. Scott Rosenberger
    it depends on whick type of jack you're using, if its a football type plate you drill a big hole through to the electronics cavity, if its a deep panel jack you drill a hole the size of the jack
  16. Scott Rosenberger
    I emailed the file good luck
  17. Scott Rosenberger
    9.5 caul should work, I use medium thickness super glue (cyanoacrylate) to glue them in. I do about 5 slots at a time then hammer each fret end in then press the fret, definately bend the radius tighter than the actual radius of the fretboard
  18. Scott Rosenberger
    Brian has a tutorial on the main site on how to build an economical fret bending jig, as for the caul, I couldn't do wothout it but it's more personal preference than anything some people prefer to hammer in their frets
  19. Scott Rosenberger
    If it's a 25 1/2" Scale guitar, the center of the post holes should be 25" from the fretboard side of the nut Hope this helps
  20. Scott Rosenberger
    Email me with your address I'll email you a file that you can use to get a mask cut at a sign shop, it should only cost about $20 to get the mask
  21. Scott Rosenberger
    See This Thread
  22. Scott Rosenberger
    Thanks Simon
  23. Scott Rosenberger
    Is this the same 7620 you refinished earlier with the black and white graphic
  24. Scott Rosenberger
    Warmoth's Compound Radius is 10-16
  25. Scott Rosenberger
    Thanks guys!!! Dave, with any luck I'll have all 3 projects finished in the next week or so. So far it has been a good b'day, I went to see Queensryche, Dream Theater, and Fate's Warning last night. Man what a great show, at the end Queensryche and Dream Theater played together doing Won't get fooled again by the Who
×
×
  • Create New...