mistermikev

lol, fair enough and hard to argue with that.

lol... I'm 6'2" and 235lbs... no one's mistaking me for skinny little geek anytime soon... but my computer IS great hehe.

I used to take a lot more photos... but cnc has made the way I work so useless to others it seems. very specific to me and probably boring because a lot of the interesting stuff happens at the design part... and mostly in my head... and taking photos of myself at the pc would just be silly!

"tooty" seems much more plausible lol! that board belonged to the infamous tooty!

crazy to look at that origin and think about how many individual cuts it has taken to get to where it is. also... find myself wondering... what is significance of "II T"... hmm and interesting riddle. perhaps you are a big fan of "the facts of life"? a reference to terminator 2? the possibilities are endless...

hehe, funny you mention that. I had great concerns about hitting them while moving my machine around manually... perhaps forgetting and wham! Having lived throught the "put a 1/4 endmill through my aluminum truss rod event of 2022"... I don't want to be anywhere near if/when that sort of thing happens. the funny thing is... the whiteside bit I did that with - totally fine. That is the one I just cleaned and am still using for everything. Aircraft grade aluminum - cut that truss in half like nothing! I actually use nylon nuts/bolts and T-slots in my spoil board to hold my stuff down, so I just use the pins to get into position and then tighten down my bolts and remove the pins... but thank you for the thought! not sure my whiteside would fair as well against steel!

hehe computerised wood dust generator lols. I was not aware that you could buy locating pins... I guess forrest for the trees. I have yet to break anything above 1/8" bits (have def ruined a number of .0236 bits!)... and was going with 1/4" bcuz the 1/8" bits I have would be entirely too short to make it through the necc 1 1/2" and have enough sticking out that I could grab. the other concern was... the bits were going in tight enough that getting them out by the blade was going to result in a cut finger sooner or later. I guess if I had some old ones I wouldn't be concerned about pulling them back out with a pliers tho. I probably should have some old ones by now but cleaned up my one 'older' whiteside the other day with some saw blade cleaner and it doesn't tear out at all even on hard woods so... she's got plenty of life yet. Either way these will be great cause I can mark them at depth easily and pretty cheap. 2" long so plenty sticking out to grab.

so... recently read and re-read @curtisa's thread about tiling a fretboard with cnc. (thanks for that!) Full disclosure - also got a lot of help from @MiKro. Well I did the tiling and I don't have anything precision to measure out quite that far but via tape measure it looks good. smashing. so... as curtisa suggested I used my cnc bits as the pins to locate the piece... and while this is a great idea... I felt like I wanted to use the butt end of them because there would be less chance of wobble... and that means pulling them back out with my fingers and risking a cut... or pulling them with a pliers and risking damaging the knifes. Further, my shorter 1/4 bits are really only 1.75" total... and going through 1/4 fretboard + 3/4" slide board + 1/4" depth of cut for location hole... doesn't leave much. I also wanted to scratch/mark them so I can be sure of the depth - but not doing that on my bits... so with that in mind I figured I'd take a chance on the precision of the steel locating pins I could buy off amazon. well... bought them and checked them against the holes I cut with my whiteside bit and they are perfect... just wanted to pass on in case anyone else can benefit - link below. $13.49 for 10 pins and money well spent. https://www.amazon.com/dp/B086DCHYQK?psc=1&ref=ppx_yo2ov_dt_b_product_details

first would like to suggest you go get the free diylayout creator... as it's a lot more organized. your blade switches - it's impossible for me to know how they work and which lug is the common looking at them... but I can tell you just looking at it that you've got the live connected from one single to the live of the other and then to several lugs... at least that's what it looks like... so those two coils would just be connected together and always on (probably not what you intended). if those blade switches are supposed to be slide switches... then perhaps get a picture of the back side of one and you can import that into diylayout creator for a more clear documentation of what you intend. looks like either a diode in parallel with a cap... in series with a resistor... or perhaps it's an op amp with a cap in the feedback loop... hard to tell. if you put a .15u cap and diode in parallel that is likely going to allow everything over say 100Hz to clip... and then that is ltd by the resistor. you are basically creating a passive overdrive similar to the 'black ice' that was popular a while back. not sure what the point of having a cap on either side of the resistor is there... no idea what we're trying to accomplish there but in theory when that is switched in it would cut bass and resist the diode more? also... you might as well describe what you thought this circuit would do. anywho... that's about all the guessing I have in me for now.

it's not so much the face... but the look on the face...it's mocking me even now! hehe was just a joke... it would be a mistake to ever take me seriously hehe.

i guess it would boil down to whether or not they decided to do that or not. in theory... you could have a through board eyelet that you just avoid once you get over 80% of the coil. that'd be an 80% tap... but I have no idea what the wires are actually hooked up to... and in theory somewhere in that stack of pcb there could be an smd resistor for a partial tap... or any number of other things. will have to read more on the site and see if they divulge this top secret info!! looking at below... def seems to be some sort of either coil tap or just splitting on the first two wires... sorry for blowing up your thread with diagrams... but i hope it's ok given you might directly benefit? here's another one showing how to coil tap anyway...

i haven't studied the fluence and what they are doing with their different 'voices'... have not found a resource that explains exactly what they are doing but given the idea of a multi layered pcb in lieu of actual wires I would think it would be foolish not to take advantage of the idea of tapping the pickups 80% of the way through the coil and doing an overwind as it would give the option to do a classic paf wind and then switch to an overwind depending on wiring... but haven't seen any literature that explains what is actually happening. that said... if they ARE doing that... this would be a RIPE situation for doing a mismatch of coils. ie 100% neck wind on one coil mixed with 80% bridge wind on opposing coil. if you/anyone knows... would love to read that.

gold covers with gold evo frets... that is a ladykiller right there imo. fluence is so on my list of things to try at some point. such a cool idea how they are made. I really like their design for metal covers too. looking fwd to it!

dip... well just tested by adding a .0177 circle to my diylayout creator and moved it around the board... yes good call the dip is where it is going to be the most problematic but should work ok. tape/ca - well perhaps I'll have to set my level for each 2" x 2" section to mitigate. that said... I could simply zero a hair above the board, and cut deeper... forcing the bit to cut a bit of 'air' before cutting the pcb. it's gonna take that much longer but would mitigate potential issues of cutting too deep and breaking a bit. the end mills I use are carbide but I imagine at the least it's going to dull them up pretty fast. with all this in mind I think I might do a clearing pass with a .0625 bit and then just use the .0177 bit to clean up the really tight spots. this is all good info and is going to give me a lot better chance at success so - thank you very much for the help!!

awesome info... I am very grateful. yes... unfortunately everything I do is a a 1-3 off. I usually do up a board of 3-5 designs at one time... but I'm always trying new designs or improving/changing my old ones... so a pcb fab house is a nice fallback... but I'd rather at least pursue this route. for me this would only be single sided so that keeps it a little bit simple. I haven't checked yet... but was planning on using my .0177 bits to cut. idk if that will be small enough... and I know it will take forever... but I have success with those for wood so hoping that level of detail would be ok... or I'll have to start re-designing my stuff. perfectly flat... well... my plan was to use a perfectly flattened piece of baltic birch and use the tape/crazy glue method to secure. I was thinking I'd mill a whole 6" x 8" pcb board... but perhaps that's crazy talk. is fiberglass really that hard to cut? also... I'm not planning on using a tapered bit... but a straight shank .0177 bit. I figure this way... all I have to worry about is getting low enough to cut the copper completely. I cut .06 depth with the .0177 bits through ebony w/o issue... so I guess I'll just have to find out how hard fiberglass is by compare. touch probe... that does sound nice. I know I should def get one. currently I just pick a zero spot and mark it... and I'm really good at driving a bit right up to the wood fairly fast. I've figured out the quick keys to help me move rapid to the spot and then once I'm within 1/16" of the zero point I just use the slow keys while watching carefully... really doesn't seem like too much of an inconvenience but I will keep your words in mind. thank you very much for the input... I will reread and digest!

I have read on the subject quite a bit and am aware of folks who use some sort of touch probe and software to create a map of a specific circuit board and then the cnc code is modified for height when machining... I'd like to forego this alltogether. I can't help but think I'm missing something, but I use 2oz copper pcb and 1/8" thick fiberglass backing so have lots of height to spare and it just seems like it would be easier to cnc it like any other thing I might cut. Just wondering if I'm missing anything? I plan to do this in the near future as I'm tired of manually making pcb so as soon as I run out of etchant I'm switching over. any/all input appreciated.

hehe, does a bit.

thats-a one a-spicy meat-a-ball. I love the guitar, nice top, clean work. that said I honestly wish I could stop seeing your avatar... i'm gonna level w you... it makes me think you are a not nice person... I'm not even sure why... cause you seem like a nice person. it might be about me... r u making fun of me w your avatar? hehe "I will not be mocked"

well, I never mentioned either. good observation. the slots on this one - my prototype, are actually going to get frets... but on the other one I'm going to do the sm slots in a purpleheart board and then put maple veneer in them. also the "profile" there will get veneer on both. I can't play fretless without training wheels!

well... with @curtisa and @MiKro on my shoulders... I completed my prototype fretboard over the weekend... learned a few things too. as it were... I found the built in logic to tile my fretboard was not going to work for me. the logic is expecting one to move the length of the tile... and if you set a really large overlay area it would cut that area 2x... ie would waste a lot of time. What I wanted to do was to get as many frets out of the first operation as possible... then do a small move to finish off the last 7 or so frets (27 frets on this one). So how did I do it? well the hard way of course. went through all my cam and split it into sections manually. not fun, but everything came out great... so will be moving on to the "presentation" grade fretboard.

nice looking top and rosette there.

it's a breezy 102 today in az... which beats the 114 it was just a day ago! that heat just sucks the life out of me... i come inside and drink a half gallon of water and have to sit on the couch for an hour for ever 20 mins of work i do! that said... looks like it was worth it for you... nice looking neck blank.

did a recent similar endeavor... more interested in projecting/estimating cost of a build but perhaps I will use to track actualized builds as well. Posting here in case it offers insight into the way I would use such a sheet. for me... I know every build is going to have certain components, and half the battle is remembering what to track. in an effort to help myself make an accurate prediction on future builds I thought I'd sort of catagorize things to help me recognize what to fill out. I've set this up as a pivot table in excel (using office libre) with functions to auto calculate qty*cost+shipping=extended cost with totals at bottom. saved as an xlsx inside a zip. Below is screenshot for quick reference. LP_CostSheet.zip

i know nothing about turbines but I know @ADFinlayson was using them (or at least I think he was) and then switched to a compressor, perhaps he'll chime in. I use a compressor and hvlp and it is so easy i just plugged and played. not even using expensive stuff either... just a harbor freight mcgraw 22gal and a $15 gun. works great for nitro anyway... have not sprayed poly w it yet but given so much feedback on this type of system online I can't imagine it's anything dif. hope something there helps.

i have two 2x12 wired up in the first way... the advantage is simplicity. I also have a 4x10 wired up to switching jacks that give me options for reconfiguration... the issue with it is it's not labeled well and I did it several years ago... so it's hard to know now what I did. there are other options... you can spend a bit and get panels that have labeled switches that will do mono vs stereo but they are more expensive. If I had to do it again I'd either make better labels, or go with a labeled store bought solution as labels are key 2 years later when you have no idea what you did!!