ADFinlayson

I've done neck resets on a couple of Taylors, their neck construction makes it an absolutely doddle to reset with a couple of shims. The construction of a taylor neck is a bit more involved though and would require a different construction to the neck block than to what I have made, I have been following the Grellier OM plans up until now which wouldn't support the extra lump of mahogany under the fretboard extension that Taylor uses.

Yeah I do need to kick the neck back a bit and the obvious thing to do seems to be remove a bit from the bottom of the heel which should be fairly simple to do with some targeted sanding, but it probably will result in my needing to shim the fretboard overhang with some rosewood veneer. I am wondering if there is any merit to tapering the fretboard slightly, it's 6mm thick and not yet radiused, perhaps I could taper it to 5mm at the nut to increase the angle. Not sure if 1mm over the length of the fretboard will be enough to get me there or if it will look stupid. I was going to go with a 12" radius which tends to look a bit thinner at one end anyway. Maybe the combination of a slightly fretboard taper and removal or a tiny bit of material from the bottom of the heel might get it where it needs to be without the need to shim the fretboard extension. yes @Prostheta there are 2 M6 bolts going into threaded inserts in the tenon. Down from M8 on the last 2 builds but I figured 6M is plenty, in fact M5 would probably be strong enough, the larger the bolt the easier it is to split the tenon because there isn't a lot of meat outside of those big threaded inserts.

Made a bit more progress. Got my headstock shaped and cut out, a few little dents there need steaming out after some happy clamping - glueing the veneer on the back got a bit tense Test fitted my tuners, These are cheap and cheerful Stewmac restoration tuners, I like the vintage look, I think I might age these in some white vinegar before assembly. I shapped the heel profile and cut out the tenon which I apparently forgot to photograph. I used a handsaw because I don't have a jig for this and apparently I like suffering And after a couple of hours of fine tuning and flossing, I have a the facade of an OM Currently the X axis is perfect and the joint between the heel and the sides close enough to perfect. But I do need to sort out the Y axis. There isn't currently any gap between the fretboard and the top so I am a bit concerned when I do kick the angle back a bit that I'm going to introduce a gap or a massive fallaway when I glue it down, not sure how best to proceed with the Y axis, it's definitely not going to get good action as it currently is though.

Those router bits look a bit good, I've ordered myself one. I expect this guitar is going to look a bit good too.

Back down the rabbit hole with the sides I bent up about a year ago now. The back and the top are both african mahogany with spruce braces. I don't know how good that is going to sound but I thought I would try putting a pickup in it anyway, I glued the back to the sides while it was still in the form, upside down so I could clean up any squeeze out. Then decided to try the spool clamps to stick the top on, worked quite well. There is no rosette other than some tortoiseshell celluloid that I bound the inside of the hole with. I used a piece to make the end graft too. Then on to the binding channel. I still hate this job, I put a lot of effort into getting the sides as flat which made a huge difference though, then used the stewmac dremel router guide to cut the channels which worked pretty well (much better than last time) so I think a lot of the difficulty in this job is down to preparation of the sides. It's not perfect but by far my best effort. I filled some hairline gaps with mahogany dust and titebond and scraped the binding flush. Then got on with the neck. I designed a new headstock that's quite a bit thinner than what I put on my electrics. A). to keep weight down and also so I don't have to glue ears on to my neck stock. This is actually my second attempt at a neck for this guitar. I drilled the tuner holes wrong twice and decided that neck wasn't fated to be. It turned out my scarf joint was glued on the piss so this time I clamp everything down to the table saw for insurance. And this is where we're at now. The veneer sheet is going to go on the back of the headstock to hide the scarf joint, I'm hoping I can carve it into a stinger This is my first time using rosewood for a bridge, I think it's going to work well though - it's not as heavy and has a much more tuneful clink than my ebony blanks My hi tech mortising jig is still going strong too.

$300 for a 16" drum sander, thats a bargain! They take up a fair bit of room but I find them well worth the footprint, looks like you've got the right idea with it on a cabinet too.

That neck joint is mega cool!

Hard choice, both fab guitars!

O Oh how I wish I could own one of those big edge sanders!

Noice!

Heaven't heard from you in a while mate, glad to see you're still building and looking forward to seeing this one come along Ash

I wouldn't call myself a pro but thank you mate, appreciated. 2018 was when I first signed up to the Crimson forum and had a go, so a little over 5 years and 32 guitars. I'm now working part-time in IT and spending the rest of the time doing commissions and setup/repairs. Never saw that one coming!

I'd like to see some more pics of that build, looks amazing. I used the crimson method of doing this with a hand plane many times. it's simply just the height of the bridge minus the height of the fretboard + frets defines the height of the block which is stick to the body at the scale line then plane down the front until you angle starts at roughly the back of the neck pickup position, then smooth it all out. height of planing block = (height of bridge + 2mm) - (height of freatboard + height of strings). For a tunomatic bridge a planing block of about 8mm will do it. I still (kind of) use this method now but I do it with the drum sander If you watch my vid from 26:28, you will see what I mean

I don't have any plans for this and I wasn't able to find any, I just found a front on shot of the sg2000 body and traced it in illustrator. I did however lend my template to another builder and he told me my template is about 1cm too small all round so I won't offer up mine!

I'm not a fan of jam, but I do like Brie

That's something we regularly try to do to each other at band practice, extra points if it comes out the nose.

Yeah it's an amazing top on this one. I've been hunting around for some more maple like this and haven't been able to find any sadly.

The final instalment

Crikey it's been a fair few years since I saw that film. The guitar was for a band called Anastasia Elliot from Tennessee, the inlay is their logo. https://www.anastasiaelliot.com/

I have no idea who Alex or droog is!

Finally got round to editing some more footage, here is the 3rd and penultimate episode.

So I did some aging with some white vinegar, put all the parts in a big tub then put some white vinegar in a small container inside the big tub with the parts and shut the lid so the fumes from the vinegar did their thing. It took a couple of hours but came out pretty well. Not full on relic just enough to make the parts look a little bit grubby. I buffed the whole guitar using the medium compound. Normally I would then go on to use some Chemical Guys fine polish on the fine mop on my buffer, but instead I just buffed with that mop dry which took out the medium scratches pretty well without making it particularly shiny and just left the odd fine scratches and swirl marks in. Guitar is finished, here are a few pics and a demo. Demo

yeah the plastics can get a bit silly, the buytrate pickup rings on crazyparts.de are 99 Euros + shipping, 129 Euros if you want them pre aged I would rather spend 200 on a braz fretboard than the fancy plastic, but I kind of think if you're building a proper 59, then go all in or it's not a proper 59.

oooh that veneer looks amazing, never see anything that nice around these parts

I do similar now too, once I've got my frets levelled, crowned and all the worst marks out of the frets, I come back with a rocker and use the stewmac fretrocker file thingy to touch up any that turn out a tad high. I really like that tool, totally worth the expense.