In my head I'm envisioning a g&l z coil split with volumes on each leg. It should be doable it would wire like a LP with independent volumes in the middle position
You have indeed standed through the finish the "rings" are the different layers.
And I agree with kill unless you are doing some sort of vintage correct or restore job. Nitro isnt worth the time or effort just to get a fragile subpar finish
Mathew may have been the original owner. The custom luitherie business is though in the best of economy's. Bone daddy may have packed up shop years ago.
Sounds like you got it. If you lower the neck the bridge will need to drop a equal amount.
I did this once years ago I took a piece of scrap clamped it to the body then used a laminate trim bit in my router to make a template. Then I swapped the bit to the type with the bearing at the top set my depth and routed the pocket it worked out nice.
Do your tracing or sketch on a piece of graph paper this will allow you to get mor accurate x&y coordinates. Plot as many points as possible the connect your arch's using those points.
Not as cool as the other stuff posted but heres mine.
The teisco is kinda suprising if I where to toss some decent tuners on it I would have decent guitar. It has a nice raunch blues tone to it.
The wah is a old Thomas organ I got it as a lot of 3 or 4 non working Crybaby's of various years it does truely have a different tone its much more mellow than the newer versions.
And then the case it's a old vox case and of it wasn't such a wreck it might be worth something.
Edit: I somehow uploaded the car and can't delete it if a mod sees fit I would love it to be deleted
<pros: suck it up. the car stays! haha>