mistermikev

again I am out of likes... so just wanted to say... I like it. I like it a lot.

here's one very similar to my familie's and in fact on the sm lake.

3D I assume you mean my comment (red blood + green)? that is an interesting factotem regarding red barns. I come originally from wisconsin where there are crap ton of red barns. in door county (my family has a red log + white stucco cabin there) every flipping cabin (log or not) is painted red and white. I always thought it was just so you could see/find the cabin when you where out on the lake. against the trees they are pretty well hidden otherwise.

thank you sir. I very much appreciate the response. might have to hang a little leather pouch with some chicken bones for extra mojo to get the tone a little more swampy... but I'm working on it (hehe). thank you on the video... and the studio. I'm very lucky my wife let me have a room... but it's getting a bit cramped!

ty nice. everytime I look at that name I think of acdc tnt (oy). the suspense is killing me. is it so blood would be obvious when you smashed your finger with it?

thank you William. I bumble through and somehow come up with pretty close to the color I was looking for. beginner's luck I 'spose!

secretly crossing my fingers that you won't as I'm pretty sure I wouldn't stand a chance. Your latest is outstanding. Honestly don't know how I have ever won with the amaz-balls guitars that folks around here post. I'm not worthy.

hehe... he said lubricant of life. side note I did some research on the origins of ladies being referred to as 'broads'. ranged from hardly offensive to incredibly offensive... on the less offensive side it was suggested it might have something to do with the term 'abroadwife' which was a term used to describe slave wifes. (yes, that's the less offensive side).

hehe, I'm glad you said that because lately I've been wondering if I'm a jerk for naming it that... I mean... I'm a jerk no doubt... but am I jerk for naming it that! so cramped in this head of mine!

thank you thank you thank you scott. on the one hand "it's just a tele" on the other "it's MY tele"! thank you for the response and support as always!

"THE BROADCHASER" WOODS: Two piece northern white ash body sourced locally from peterman lumber in phoenix Flamed maple fretboard (thanks to JB Land @ 6_strings_plus on evilbay!) Flamed maple neck sourced locally from peterman lumber in phoenix HARDWARE: Bridge - Gotoh BSTC1 compensated saddle Tuners - Gotoh SD91 Pickups - Rose Alba / Bourban + hidden rail humbucker Controls - CTS volume pot + Alpha 4 pole 3 throw rotary + Alpha 3 way selector Bone Nut PROFILE: a somewhat beefy 59 soft v with extremely rolled edges on the fretboard SCALE LENGTH: 25.5" RADIUS: 9.5" FRETS: 21 frets - jescar thin / tall WEIGHT: 7lbs 6.5oz MARKERS: Black dots FINISH: Body - mohawk blonde nitro + watco nitro clear - relic'd Neck - stew mac amber dye + watco nitro clear - relic'd As with all my builds... the motivation is to learn something, challenge myself a bit, and most importantly: have fun. This build was def not without it's struggles! I had never done a relic finish before and had my doubts of wether or not I'd ever get there as I was trying to get the lacquer to check! Had uncertanty of how I would get the color I wanted with my limited abilities/resources. As usual... thanks to a little help from my friends... I survived! Thanks again to all who offered advice/resources/links/comiseration/responses-to-my-threads! I Have always wanted a solid body tele in the classic 'butterscotch blonde' motif. The idea that came to mind was a relic that was impossibly well cared for. I have always loved the look of lacquer checking and wanted to use that more as a finish enhancement as opposed to implying that this was a really old guitar. I chose all flamed maple for the neck -knowing that you wouldn't really see that on a late 50's tele (nor a two piece neck - no rules here!). Electronics that allow for classic operation, but offer some modern hum-canceling features via the hidden pickup. A dual action truss rod but with traditional heel access. A solid tele body, but with a smuggler's route for weight reduction. All in all a mix that I had hoped would be a nod to the past with a few modern flares. Thanks again to the forum for empowering/encouragin/enabling! BUILD THREAD: Click here to see my build thread for this guitar DEMO VIDEO:

right - stamped plates. looks like some crazy cold war missile control (sorry, my imagination runs wild pretty easily). "projecta oy". no idea what that means... but sounds cool!

all of them! hehe. to be honest I'm not sure what worked for me but I'll try to tell you as best I can what I did. I put it in the fridge for 24hrs... then I pulled it out and used my heat gun on the lowest setting. seemed like the hair dryer wasn't hot enough... and the heat gun would bubble the paint if turned up any higher... so I kept it moving pretty good but tried to warm up one area at a time. tried this a few times and still wasn't seeing much. in rhetrospect the cracks were only visable from the right angle so they may have started earlier than I saw them. each time I'd pull it out of the freezer and warm it up... then I'd let it sit for an hour... then warm it with the heat gun and get the surface temp such that I could feel it was warm... then blast the shizzle out of it with the air can turned upside down. I've seen folks do this before and get big checks... and I was thinking I'd love to have lots of little checks everywhere but figured I'd see how far I got once I started getting a few big checks. big checks never happened... just started seeing light small checks... so then I took rit dye (moca) and wiped it all down... let it sit for until it just started getting dry then cleaned it with min spirits. I only had checks in one area (behind the bridge) so I put it back in the freezer and waited 24hrs again. pulled it out, did the heat gun, then did can of air + heat gun, then another round of dye. I could see I got a number of new areas. from there I started to target the lighter areas and the sides. few more rounds and I was pretty satisfied. you can't really see the checks from a ways away... but up close it looks great to me. the headstock has even smaller checks that wouldn't take dye. to be honest I would have liked a little more but my decal started to soak up the dye so I stopped there. have a lot to learn but pretty satisfied overall and the body turned out better than I had even hoped.

============01/25/20=============== got the binding on the tuxedo... got some inlay done... but funny thing happened. turns out this 25.5" scale length fretboard has fret slots from a 24.75". the must have put the slots in the wrong one... (or perhaps I ordered a 24.75sl board. oh well. could order a new one and some new inlay... but this is an opportunity to try a 24.75sl on a tele... so think I'll go back to my orig blank and make that work. (mmmm, lemonaid). gold mop on granadillo and white mop on ebony... 780.24 kB · 0 downloads also, finally got my broadcaster to check... check please! remember, it's not the size of your check that matters...

so... one question... have you noticed an increase in sustain since recessing the jack? if so, I might try it! looks good. nice job.

I did not enjoy doing magnets myself... pita... but I have to admit... it's nice when I need to get in the ctrl cavity. anywho, you cover looks nice and tight. I'd stain it and go light on the edges. can always sand them a bit after. be a shame to take a chance on ruining the great job you did there.

for some reason I'm really attracted to the dials/controls on old machines like that. I find them very pleasing to the eye. We have some crazy 50's printing presses at my work and the chrome labeling, bakelite dials... very stylish, have been meaning to take pics sometime. thanks for this...

is this a competition? race to the grave is on... vaper, had heart attack, and have diabetes... and doctor who can't be bothered. (what do I win?) I often think of my remaining life in terms of how many guitars I can build! anywho, I commiserate with you regarding fretwork... man I dread it. that said my most recent - I did thin frets... man was that a quick/easy job compared to jumbo. someone needs to design an elec fret crowner. "I don't care what it costs... I'll take it".

nice recovery!

interesting. not a violin guy but def will enjoy seeing this built. I imagine building another instrument (other than guitar/bass) probably would involve some valuable and translatable lessons. do you play?

nicely done. you really turned it from trash to class.

once again I'm out of likes... so I just wanted to say... I like this! thanks for sharing.

thank you AD! yes, total pain. one strip spontaneously combusted... literal flame coming off of it from the heat gun at med setting! was tricky because I had to get the binding really soft to do those circles at the end... probably within a few degrees of starting on fire! thought about trying to build a channel to bend the binding then apply but I don't plan on using the same f hole over and over so... I just winged it. thanks again for the reply.