haha dont be so sure, motospray (you US guy probably wont have this) quick strip will take 2 pack off i stripped my celica with that **** and there was 3 layers of what appeared to be 2 pack, a coat of isolator then 2 coats of enamel, and it took all of this off with 2 applications of this ****, its a thick as gooey substance and good god it smells strong, its like sniffing acetone but it smells worse and eats through just about every form of "chemically resistant" gloves
just going to offer my opinion now guys
after having done 3 guitars in rattle cans and 1 in polymersied tounge oil, i will say that the tounge oil has been by far the most durable, but was a kent of a job to do 20+ coats, the first rattle can job was crap the second a bit better, and the third was by far the best, the first one i used uncatylised enamel absolute crap that was, the second and third i used urethane in a can, second was crap cos i did it in summer the third came out very nice
after rebuilding and repainting my celica i have bought a spray gun (only a 90 AUD grav HVLP) and i cannot fault it, and the finish if poorly sprayed is about par with a good rattle can job, but IMHO you should buy a compressor and gun and go from there, bit of extra out lay, but with the compressor you can then use a rattle gun (i have a nice 900ftlb one:D) diegrinder and other really handy tools or just use it for its air squirting abilities for cleaning up
my 2c
cheers
luke