RestorationAD Posted May 27, 2018 Author Report Share Posted May 27, 2018 3 hours ago, Prostheta said: You always go back to the SGs eh Brett? I can't blame you. They're so fun to make with the bevelling. Just finishing up Nina's Jr. It looks like I accidentally fitted a nickel stoptail.... I like that. Maybe I will build one... doh. Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted May 27, 2018 Report Share Posted May 27, 2018 17 hours ago, RestorationAD said: Of course this didn't even go well. The old lacquer didn't flash out fast enough and I developed a few foggy areas and runs. So I waited a week and sanded it out. Once it was flat I used the very last few drops of the orange to fix the burst and shot it with a few coats of new lacquer. Clearly the process getting there was a royal PITA - but the result is magnificent! Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted May 27, 2018 Report Share Posted May 27, 2018 6 hours ago, Prostheta said: You always go back to the SGs eh Brett? I can't blame you. They're so fun to make with the bevelling. Just finishing up Nina's Jr. It looks like I accidentally fitted a nickel stoptail.... I was wondering how this one was getting on. With apols for the thread hijack, looks good Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted May 27, 2018 Author Report Share Posted May 27, 2018 Tx @Andyjr1515 I am not going through this with the S9. Even though it is scheduled to be Loch Ness green... Quote Link to comment Share on other sites More sharing options...
Prostheta Posted May 27, 2018 Report Share Posted May 27, 2018 6 hours ago, RestorationAD said: I like that. Maybe I will build one... doh. If you do Brett, I'd recommend having a look into ABM's 3024 adjustable wraparounds: https://abm-guitarpartsshop.com/ABM-GUITAR-PARTS/Wraparound/Modern-Adjustable/ABM-3024:::256_88_122_123.html?language=en I have one of these allocated to (one of) the RG/SG(s) and it's a very very fine unit. Perfect for a Jr, where you want minimal controls and a spartan layout. Nina's was designed in this manner, however I went TOM/stoptail. I was tempted though. Regardless, designed to play with a cranked valve amp so you can clean it up by working the volume and tone. Organic, raw. That sort of buzzwordland. Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted May 28, 2018 Author Report Share Posted May 28, 2018 23 hours ago, Prostheta said: If you do Brett, I'd recommend having a look into ABM's 3024 adjustable wraparounds: https://abm-guitarpartsshop.com/ABM-GUITAR-PARTS/Wraparound/Modern-Adjustable/ABM-3024:::256_88_122_123.html?language=en I have one of these allocated to (one of) the RG/SG(s) and it's a very very fine unit. Perfect for a Jr, where you want minimal controls and a spartan layout. Nina's was designed in this manner, however I went TOM/stoptail. I was tempted though. Regardless, designed to play with a cranked valve amp so you can clean it up by working the volume and tone. Organic, raw. That sort of buzzwordland. I like ABM stuff a lot but I think I have a few Tone Pros just laying around in my parts box http://www.tonepros.com/avt2m-tonepros-wraparound-set-wmsprs-locking-studs-for-prs-santana-models/ 1 Quote Link to comment Share on other sites More sharing options...
Prostheta Posted May 28, 2018 Report Share Posted May 28, 2018 Yep, those'll do the trick. Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted May 28, 2018 Author Report Share Posted May 28, 2018 Going to continue with the rough setup before painting routine. I am not a fan of surprises after finishing. Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted May 28, 2018 Author Report Share Posted May 28, 2018 Strings are on, nut is roughed in, tuners are fit, pickups are fit. Somehow I ended up with a low fret at the 9. I must have pushed too hard with the fret press. It looks a little over seated. It is only off a hair so when I level and crown it should be fine. Everything else fit like expected. I will let it sit a few days then take it apart for painting. Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted May 28, 2018 Author Report Share Posted May 28, 2018 I guess I will start on final assembly on the wookie while I wait. Quote Link to comment Share on other sites More sharing options...
Mr Natural Posted May 28, 2018 Report Share Posted May 28, 2018 good to see you back Rad. the axes look great (as always). Did you put an angle in the neck on the sg? I just noticed one of the pics the bridge appears to be recessed. PS- I think I have said this before- but I dig those boogies. Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted May 28, 2018 Author Report Share Posted May 28, 2018 1 hour ago, Mr Natural said: good to see you back Rad. the axes look great (as always). Did you put an angle in the neck on the sg? I just noticed one of the pics the bridge appears to be recessed. PS- I think I have said this before- but I dig those boogies. Ahhh.. .the SG is a player. No neck angle. The ABM bridge base plate is recessed flush with the body. The SG is basically a 24.75" S9 with an SG body and 3+3 headstock. I really like my right hand to be close to the body when playing. I really don't like TOMs anymore. The older I get the more it makes my wrist sore playing the traditional TOM guitars. The idea was I wanted an SG body guitar I can pick up whenever and play like my S9 express... a real workhorse. The guitar turned out a bit heavier than I wanted but it is so monstrous... I can't wait to put good strings on it and set the intonation. The Boogies like it. I miss my Mark IV and the 4x12 EV cab but the Calibers do a good job of being Boogies. I re-tubed the Studio with all Electro Harmonics 12ax7 and that gave it the liquid fire Mark II C+ lead tone at low volume. The .50 Caliber + is the greatest version of that amp ever... coupled with the Theile ported EV it is a true monster capable of Master of Puppets like devastation. Funny enough I bought the .50 and EV cab for $500 a long time ago. I bought the Studio .22 for $500 as well. I have to say best $1000 I ever spent on music equipment. I have a complete hand wire kit for the Blackheart I just can't find time to tear it apart. And honestly it pales next to the boogies. Quote Link to comment Share on other sites More sharing options...
curtisa Posted May 28, 2018 Report Share Posted May 28, 2018 I didn't realise the Wookie was still in a state of semi-assembled-ness after all this time. I used to own a Caliber 50 head. Loved the clean tone, could never get along with the distorted channel, too murky and fuzzy for my tastes. Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted May 28, 2018 Author Report Share Posted May 28, 2018 1 hour ago, curtisa said: I didn't realise the Wookie was still in a state of semi-assembled-ness after all this time. I used to own a Caliber 50 head. Loved the clean tone, could never get along with the distorted channel, too murky and fuzzy for my tastes. Tubes. Old amps like quality tubes. My .50 cal has mostly USA made tubes. God help me if one of them ever burn out... I will have to go Russian at that point. The .22 is already all Russian and it is not the same. Quote Link to comment Share on other sites More sharing options...
curtisa Posted May 29, 2018 Report Share Posted May 29, 2018 Nah, tried loads of tubes. Even modded the preamp from the Cal 50 to the Cal 50+ version. Just not my kind of tone. More to do with the preamp circuit topology than anything else. I find I'm drawn to the Soldano SLO100 and their various derivatives more. Quote Link to comment Share on other sites More sharing options...
ScottR Posted May 29, 2018 Report Share Posted May 29, 2018 On 5/26/2018 at 5:45 PM, RestorationAD said: Yup. Last SG ever. It was horrible. I lost 6 weeks just painting and repainting... Right when I was shooting the burst the wind picked up and started blowing the white floating cat o nine tail seeds into the garage. I raced to close the door... Then @ScottR a damn gnat landed in the fresh lacquer. Luckily he freed himself and I only shot over his foot prints. Props for sticking with the finishing process. I'm not sure I wouldn't have booted the thing across the garage about halfway through that. Too bad the gnat got away....serious mojo flying around with sticky feet. It's really good to know you are making sawdust again. SR Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted July 15, 2018 Author Report Share Posted July 15, 2018 Backplate done. Name is VOID. As in "Into the Void" Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted July 15, 2018 Author Report Share Posted July 15, 2018 Dressed frets and filled grain on S9 Quote Link to comment Share on other sites More sharing options...
ScottR Posted July 16, 2018 Report Share Posted July 16, 2018 On 7/14/2018 at 7:56 PM, RestorationAD said: Name is VOID. Nice, I like it. SR Quote Link to comment Share on other sites More sharing options...
Mr Natural Posted July 16, 2018 Report Share Posted July 16, 2018 On 7/14/2018 at 8:56 PM, RestorationAD said: As in "Into the Void" heavy. As in one of the heaviest sickest metal licks of all time. Did anyone do C# tuning before that? 71ish? Nicely named. You better be slinging the sludge on that puppy. no Bee-Gees covers ok? Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted August 12, 2018 Author Report Share Posted August 12, 2018 Quote Link to comment Share on other sites More sharing options...
RestorationAD Posted August 12, 2018 Author Report Share Posted August 12, 2018 Now the Green Of course the can let me down and it is blotchy. So I will wet sand it out this week and get a new can of Fluorescent Green. Quote Link to comment Share on other sites More sharing options...
ScottR Posted August 12, 2018 Report Share Posted August 12, 2018 Oh my eyes! It hurts us Precious. It is so bright. SR That is damn near radioactive! sr 1 Quote Link to comment Share on other sites More sharing options...
Prostheta Posted August 13, 2018 Report Share Posted August 13, 2018 Cleanup on aisle 4. 1 Quote Link to comment Share on other sites More sharing options...
avengers63 Posted August 20, 2018 Report Share Posted August 20, 2018 Have you started making pickups again too? You know I'm jonesing for a HSS set with rail magnets... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.