Jump to content

David's PRS and Matt's Tele


Recommended Posts

1 hour ago, ADFinlayson said:

There were indeed issues with this diagram. Fortunately @mistermikev came to the rescue and helped me figure it out. 1. My volume pots were wired backwards so they worked in reverse. 2. I had modern wiring not 50s so my volumes were both acting as masters instead of allowing me to bled in the middle positions (every days a school day). 3. after what felt like hours of debugging the awful hum that I was getting, Turned out my soldering iron was interfering - That one was especially annoying.

But it's made, finally. Thanks Mike.

Just needs a bit of a setup, little bit of a buzz at the upper frets to sort out

IMG_1770.thumb.jpg.e03215b5271120df1776ad8fb5f7f355.jpg

IMG_1773.thumb.jpg.48ed1ff39fec153a99a2b6b6ba6bfbb9.jpg

IMG_1775.thumb.jpg.3a46eca078ebb1077c0a7ab378f03cd4.jpg

 

anytime my friend.  that thing is a killer front and back.  7 distinct types of kickass.  nice work.

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...